|
|
QUALITY & CERTIFICATION |
We serve all types of companies big and
small, yet our goal is always the same:
|
The Decc Company has a quality management program utilizing Statistical Process Control (SPC) and continuous improvement with a goal of zero PPM. Coating Quality is emphasized in every project handled by Decc, to make certain that our work meets Automotive, Food Production, Furniture, Industrial, Medical, Military / Aerospace, and Recreational specifications where applicable. Prevention and detection of non-conformance, timely corrective action and analysis of information to evaluate Coating Quality and effectiveness is critical to success. The Decc Company provides world class customer service and excels at meeting our customer's requirements for just-in-time delivery and quality. The Decc Company has earned the ISO 9001 Certification. |
Inspection tests include the following: |
|||
|
|
Adhesion / Cross Hatch A test method by which the bond between the coating and the substrate are checked. Decc performs 4 different types of this test:
|
 |
Attribute Gauging A Test method by which coating thickness is checked to validate that the coating is not too thick to cause fit issues. The types of Gauges include:
|
 |
Coating Thickness A test method where the actual coating thickness is measured to ensure that the thickness falls within the tolerances to the part specifications. Decc performs this test using a Fischerscope and a Beta backscatter. |
 |
Conductivity A test method to validate properly activated and cured Sermagard coating via Ohms resistance. Sermagard is a licensed coating that cures at 650 F. The coating must be properly activated via blasting of glass media to bring the sacrificial aluminum to the surface of the coating. |
 |
Cure Testing A test method where the coating is evaluated to ensure that it has been properly cured. This is done via chemical rub on the surface of the coating. 2 test methods currently used are MEK and Water (which is strictly used on Sermagard coating). |
 |
Dimensional Measurement A non desctructive test method to validate coating thickness on the substrate.Two measurement devices that Decc use are Calipers and a micrometer. |
____________________________________________________
Designed and Engineered Custom Coaters Home | Coatings Problem Solving | Coating Engineering Specifications | Coatings / Suppliers
Coating Capabilities / Services | Coating Applications | The Decc Company History | The Decc Company Directions & Accomodations
The Decc Company Quality Page | The Decc Company Polyurea Page | Coating Terminology | Contact Decc | News | Environmental
Site Map
© 2007 The Decc Company