Contact Us to Learn More!

Quality & Certification

Contact Us Today!
Quality Standards
The DECC Company is proud to announce we’ve had five consecutive years of ZERO findings during our external ISO audits!

We provide coating services for all types of companies, in a variety of industries, yet our goal is always the same:

  • Delight Our Customers by meeting
  • Expectations for Delivery and Quality through
  • Continuous Improvement and a
  • Commitment to our company values.

At the DECC Company, we are an ISO 9001: 2008 certified coater with a quality management program that utilizes Statistical Process Control (SPC) and continuous improvement. We conform to the CQI-12 coating system assessment which requires a thorough internal audit of our coating process on an annual basis. We strive for excellence and have demanding goals of zero PPM's and 100% on-time delivery because our customer's satisfaction is of the utmost importance. Quality is emphasized in every project handled by DECC to make certain our work meets Automotive, Diesel, FDA, Furniture, Industrial, Medical, Military, and Aerospace / Avionics, and Alternative Energy / Fuel Cell specifications where applicable.

Inspection tests include the following:

Fischerscope Technology Coating Thickness

A test method where the actual coating thickness is measured to ensure that the thickness falls within the tolerances to the part specifications. DECC performs this test using a Fischerscope and a beta backscatter.

certified coating services Attribute Gauging
  • Go No Go
  • Ring
  • Plug
Cure Testing Cure Testing

A test method where the coating surface is evaluated to ensure that it has been properly cured. This is done via chemical rub on the surface of the coating.

automotive coatings Dimensional Measurement

Two non-destructive measurement devices that DECC uses are calipers and a micrometer.

coating services Adhesion / Cross Hatch

A test method by which the bond between the coating and the substrate are checked. DECC performs 4 different types of this test:

  • X Cross Hatch
  • Grid Cut
  • Triple Cross Hatch
  • Non Destructive
Cure Testing Phosphate Titration

A scientific test to confirm concentration of the phosphate bath.

ISO 9001: 2008 CERTIFICATION
Click here for printable version

If you have a coating problem with demanding quality standards, the DECC Company has the solution. Please contact us today!


Site Map | Contact Us | Webmail Login  | Meeting Center | Site Credits: Ecreativeworks | Content Provided by The DECC Company