Featured Article
How to Center Your Process in a Coating Application (Here’s a Hint: You Can’t)
In every quality position, in every market, the goal is always the same: ensure the parts you are producing fall within their applicable measurements per the specification to guarantee a good part.
Read More![](https://www.decc.com/wp-content/uploads/2018/01/Battery-Bolts-1-640x390.jpg)
How a Rack-Spray Process Audits Your Parts
Utilizing a rack-spray coating application for your components as opposed to a dip-spin method has...
Coating Information, Quality Information
![](https://www.decc.com/wp-content/uploads/2018/01/IMG_2184-640x390.jpg)
The Three C’s: Coverage, Cure & Cross Hatch
Will the coating pass this test or that? Will it reach this many...
Coating Information, Quality Information
![](https://www.decc.com/wp-content/uploads/2018/01/Tumble-and-Pangborn-640x390.jpg)
Common Surface Prep Types
A coating only performs to the level of the surface of which it...
Quality Information, Surface Prep
![Bus Hatch Follower with Dry-Film Lubricant](https://www.decc.com/wp-content/uploads/2017/01/IMG_2458-640x390.jpg)
Full Film Properties & Cure
We have had customers contact us because coated parts being received from their...
Coating Information, Quality Information
![](https://www.decc.com/wp-content/uploads/2018/01/Quality-640x390.jpg)
Why Most Coating Applicators Don’t “Test to Specs”
Time and again we are posed the question as to whether we can...
Coating Information, Quality Information
![](https://www.decc.com/wp-content/uploads/2018/01/Xylan-1014-640x390.jpg)
Solving Abrasion and Wear Issues with a Functional Coating
Abrasion is the grinding, wearing, or rubbing away by means of friction. In...
Coating Information, Quality Information
Browse by Category
Stay Connected
Follow us.